Tekniset ominaisuudet
|
POWERMORTARTM - TECHNICAL SPECIFICATION
| Property | Test criteria | Test result | Test method |
| Compressive strength | 1 d (+20 °C)7 d28 d91 | 5 - 30 MPa 40 - 60 MPa 50 - 70 MPa60 - 90 MPa | SFS 4474 |
| Flexural strength | 1 d7 d28 d91 d | 1,0 - 7,4 MPa6,0 - 7,4 MPa6,4 - 7,7 MPa7,0 - 7,4 MPa | SFS 5444 |
| Density | 2000 - 2300 kg/m3 | SFS 5442 | |
| Freeze-thaw resistance, 100 sequencesCompressive strength reference freeze-thawFlexural strength reference freeze-thawUltrasonic pulse transmission time reference freeze-thaw Freeze-thaw resistance, 300 sequences Specific surface of air voidsSpacing factor Frost-salt resistanceVolume change | 63 MPa60 Mpa 6,5 MPa8,4 MPa 39,2 ms39,5 ms No damage 30 mm2/mm3 (>25 mm2/mm3)0,16 mm (£0,26 mm) 1,1 % (<3,3 %) | SFS 5447, By32 Thin section analysis Thin section analysis SFS 5449, By 32 | |
| Chemical resistance | Good | ||
| Resistance to carbonation | Very good | Phenolphtalein test | |
| Consistency (Slump test) | Plastic | SFS 5284 | |
| Cohesion | Excellent | ||
| Adhesion (Bond strength) | Strong | SFS 5446 | |
| Pumpability | 50 meters along the pipe | ||
| Initial set | 2 - 5 hours at 15 - 20°C (Relative humidity >90%) | ||
| Final set | 3 - 6 hour at 15 - 20°C (Relative humidity >90%) | ||
| Shrinkage, linear | ± 0.01 % ???? |